Emerald tree skink
Lamprolepis smaragdina
Photo: Lamprolepis smaragdina 1 · NRJMelvinT · CC BY-SA 4.0 · Changes and credits
These guides provide general husbandry information and do not replace veterinary assessment. If your animal shows symptoms or its condition worsens, contact a veterinarian experienced with exotic animals.
- Warm zone
- Warm perch: 35 °C
- Cool zone
- Cool air: 24–29 °C
These notices cover the cited provisions, not every possible national or local rule. Check additional requirements with the competent authority.
Description
Lamprolepis smaragdina is an arboreal skink widespread in the Indo-Pacific region. It has a slender body, long tail and smooth scales, often vivid green but geographically variable. It is diurnal and runs rapidly over trunks and branches; its diet consists mainly of invertebrates and may include plant foods.
Behaviour
Response to contact varies: observe the individual’s stress signals.
Housing together
Lamprolepis smaragdina can be kept singly; multiple animals need an enlarged enclosure, multiple climbing trunks, visual cover and separate feeding sites. Check that each eats and uses perches, separating animals that are driven away. Do not house males and females together unless you intend to manage breeding.
Enclosure and climate
Arrange branches at every height, foliage and visual cover. Check ventilation and allow surfaces to dry between mistings. Before arrival, test the gradient with air probes, measure surfaces separately and guard heat sources.
Night: 20–25 °C.
Making height usable
Secure horizontal, sloping and vertical branches to the structure, using diameters that offer grip and supports suitable for adult weight. Connect them from the exposed lighting branch to the cool area, distributing supports across levels. Place hide entrances beside branches; add foliage along routes without blocking dishes, doors or vents.
Testing and access
Connect specified heat sources to compatible thermostats and guard against contact. Secure probes according to device instructions; measure air at resting sites and heated surfaces separately with independent instruments. In housing with water, also check water temperature and quality: one zone’s thermostat does not control the others.
With the complete enclosure running, record day and night readings and compare them with the sheet. Test doors, cable openings and cleaning access, keeping vents clear. Change one variable at a time and recheck after each adjustment.
Lighting and UVB
Ferguson zone not assigned with sufficient precision to this taxon.
At the exposed position aim for approximately UVI 2–3, measured at the back or head. The animal must choose its exposure and reach UVI 0 retreats. This local target differs from the Ferguson ecological band and should not be maintained everywhere throughout the day.
UVB is essential in indoor housing. Outdoors, direct sunlight can provide it if shade is always accessible. Select the lamp to achieve the appropriate UVI at the positions the animal uses.
UVA is recommended as part of daytime lighting, including when UVB has not been shown to be indispensable. Check the UVB source’s spectrum, as it may already emit UVA: a second lamp is not automatically necessary.
Linear UVB tube with reflector. Indicative UVB percentage stated on the lamp: 2–7%; final selection depends on UVI achieved at the actual distance.
For maintenance, a cycle of approximately 12 hours of light and 12 hours of darkness can serve as an initial reference. Use a timer to switch lights off at night, and keep retreats available so the animal can withdraw from light during the day. Adapt day length to species and origin, following the specific guidance for seasonal care and breeding.
Light in the animal’s daily life
The Ferguson zone remains unverified despite a published practical peak. Keep routes between lit branches and screened cavities.
An example layout in the enclosure
To make the layout concrete, take housing measuring 60 × 45 × 90 cm, using the first dimensional configuration in the sheet. This is a mounting example: retain the conditions and any alternatives attached to the stated minimum.
In a wooden enclosure with internal lighting, imagine the tube 85 cm above the floor and the back or head at 45 cm. The geometric distance is therefore 40 cm. The branch or platform lies below animal height, according to body size. Place lighting over one side, with a route to fully screened retreats.
In a glass enclosure with a mesh roof, retain the same animal height and imagine the tube 5 cm above the mesh: distance becomes 50 cm. Mesh attenuates UV variably; ordinary glass roofs block UVB. Increasing the percentage alone is insufficient: measure beneath the mesh and adjust height, output or layout as needed.
These distances describe the example, not a safe clearance for every lamp. Select the source and adjust mounting until approximately UVI 2–3 is measured at animal height in the exposed position. Also respect the minimum clearance specified for the model used. Recheck with furnishings, guards and mesh installed, including the highest reachable points and animal growth.
Choosing and checking lighting
First define the patch that should illuminate the whole body and the route to a screened retreat. For a broad patch, select a linear tube with reflector; consider a compact only if its useful patch covers the body and leaves an accessible gradient. Check model, output, reflector and mounting distance, then compare measured UVI with the species target. Label UVB percentage alone cannot determine distance and intensity.
The decisive check uses a UVI meter facing the source at animal height. Check the centre and edges of the exposed patch, the highest supports and retreats, which must allow withdrawal from UV. Repeat after moving equipment, changing lamps and plant growth. Without a meter, use the manufacturer’s instructions and measurements for the exact configuration, including safety clearances.
When UVB or UVA are absent
If the UVB source fails, restore the installation and recheck the exposed area. Oral D3 may be considered as temporary support but is not a complete or universally safe replacement. Consider calcium, D3, diet and animal condition together: avoid improvised extra doses.
UVA contributes to environmental perception and behaviour and cannot be replaced by vitamins or calcium. A reptile UVB source normally also emits UVA: check its declared spectrum. If the existing lighting lacks it, complete the installation with a suitable source; an ordinary white LED does not guarantee UVA and a UVA-only lamp does not provide UVB.
Humidity and ventilation
Mist leaves and branches, leaving reachable droplets for drinking; allow surfaces to dry between water inputs. Measure beside perches outside the spray and keep vents behind foliage clear.
Feeding
Lamprolepis smaragdina. Varied invertebrates and small amounts of fruit; a compatible complete prepared diet can add variety, but is neither mandatory nor a reason to remove insects.
Recommended foods
The tiers describe dietary use: rotate foods within each tier rather than treating them as an absolute nutritional score.
| Food | Dietary role | Benefits and limits | Preparation |
|---|---|---|---|
| Crickets and locusts | Main choices | Supply protein and encourage hunting; calcium is low relative to phosphorus, so preparation and supplementation are needed. | Use captive-bred insects and gut-load them as described below. Select suitably sized feeders, place the meal’s batch in a clean container and apply a thin calcium coating immediately before offering them. |
| Feeder roaches | Main choices | These feeders provide a useful second protein source for rotation, but do not constitute a complete diet or replace calcium supplementation. | Offer well-fed soft nymphs sized to the mouth; avoid excessively hard adults. |
| Silkworms and black soldier fly larvae | For rotation | Diversify texture and nutrients. Black soldier fly larvae can supply more calcium, but content depends on rearing: they do not make the entire diet complete. | Choose appropriately sized feeder larvae. Keep silkworms on their specific food; check the supplier’s supplementation guidance. |
| Squash, courgette, edible flowers and varied vegetables | For rotation | Add variety, but soft vegetables should not replace all fibrous leaves. | Wash, remove hard seeds and chop; mix with leaves to discourage selective feeding. |
| Ripe fruit | Occasional | Rich in water and sugar and not a complete food; offer a small taste replacing part of the meal. | Wash and remove stones and large seeds; no syrup-preserved fruit, honey or added sugar. |
| Waxworms, mealworms and superworms | Occasional | Fat-rich larvae concentrate energy and often contain little calcium: use as a small part of variety, not the sole food. | Replace part of the meal instead of adding them to a full ration. Avoid hard or oversized larvae for small animals. |
| Wild insects, fireflies and contaminated prey | Avoid / not a staple | May carry pesticides, parasites or toxins; a healthy appearance does not establish safety. | Use traceable feeder cultures; do not collect insects beside roads or treated gardens. |
Comparable nutritional values
Protein, fat, calcium and phosphorus are percentages of dry matter, excluding water; dry matter itself is a percentage of fresh weight. These are reference analytical values compiled in a clinical table, not guaranteed contents of your batch or a universal ranking. Age, rearing, feeding and supplementation change composition. Do not compare them directly with fresh-food percentages or already diluted prepared diets. Comparable numbers are not provided for other foods.
| Insect | Dry matter | Crude protein | Crude fat | Calcium / phosphorus | Ca:P |
|---|---|---|---|---|---|
| Adult house cricketAcheta domestica | 32% of fresh weight | 62.6% DM | 20.4% DM | 0.3 / 1% DM | 0.3:1 |
| Migratory locustLocusta migratoria | 31% of fresh weight | 67.5% DM | 14% DM | 0.1 / 0.7% DM | 0.14:1 |
| Mealworm larvaTenebrio molitor | 32.8% of fresh weight | 52.8% DM | 36.1% DM | 0.3 / 0.8% DM | 0.37:1 |
DM = dry matter. Ca:P describes calcium relative to phosphorus before supplementation: a protein-rich feeder may still be calcium-poor. Offered portions remain those for this species and life stage.
Meals by age and size
| Stage and size | Frequency | Amount per meal |
|---|---|---|
| Young: from first feeding until growth is well established | Daily | Initial trial portion: 3–5 small insects, one at a time. Count those eaten in about 5 minutes; stop when interest wanes rather than continually refilling. Adjust the count to actual prey size and growth. |
| Juveniles and subadults: still growing noticeably | Daily | Initial trial portion: 3–5 small insects, one at a time. Count those eaten in about 5 minutes; stop when interest wanes rather than continually refilling. Adjust the count to actual prey size and growth. |
| Adults: near final size, growth has slowed | Every other day | Initial trial portion: 3–5 small insects, one at a time. Count those eaten in about 5 minutes; stop when interest wanes rather than continually refilling. Adjust the count to actual prey size and growth. |
Adjusting portions
To assess the portion, compare the amount and type of food eaten with growth and body condition. Weekly weighing of juveniles and monthly weighing of adults helps follow the trend. Adjust the ration gradually when growth or reserves require it; reduce it if body condition indicates excess weight or leftovers remain. Investigate unexpected weight loss or abnormal swelling rather than addressing it only with more or less food.
Preparing and offering meals
Prepare insects during the 24–48 hours before feeding: keep them in their culture container with a complete feeder diet and safe hydration. Check access to food and water and remove spoiled leftovers. Then select feeders of the specified size and prepare only the batch to be offered. This step, called gut-loading, improves prey quality; bran or potato alone do not correct deficiencies.
At feeding time the prey should be easy to swallow. As an initial guide, choose insects no wider than the space between the eyes, then adapt size to the mouth and the animal’s response. Offering them individually or in an escape-resistant dish lets you see actual intake and remove leftovers.
Trial amounts are a starting point for a healthy, active animal at correct temperatures: record intake and weight trend, then adjust the ration. Do not feed again merely because it continues striking at prey.
Calcium and vitamins
Immediately before feeding, lightly coat low-calcium insects with phosphorus-free calcium: they should remain visible, without clumps. Common insects often have an unfavourable calcium:phosphorus balance; rotating them alone does not correct it.
Choose one supplementation programme: plain calcium for ordinary meals and a species-appropriate multivitamin at its labelled feeding intervals. Record the product and its existing D3 and vitamin A; do not add a second dose to meals using a combined product. With measured UVB, agree the oral D3 provision; product concentrations are not interchangeable.
Daily care
First days
Record identity and origin and prepare separate housing. Before arrival, check closures, water and retreats. Offer the foods in the sheet and record intake, leftovers and weight. Follow a quiet maintenance routine and keep hides available, avoiding capture just to observe the animal.
Cleaning
Keep animals and equipment away from kitchens and food areas, use tools dedicated to each enclosure and wash your hands with soap and running water after handling animals, food, tank water or furnishings. Quarantine new arrivals separately and agree the duration and checks with a veterinarian before introducing them to established animals.
Handling
Prepare the transfer container near the animal with a reachable entrance. Where possible, guide it into the container without chasing it around the enclosure. Close the container before moving it and check that it is secure; do not grip the tail or limbs and limit contact to necessary transfers.
Checks
Weight loss, weakness, injuries or abnormal breathing warrant veterinary assessment.
Record appetite, droppings and environmental changes; a check is not an automatic treatment.
Breeding
Sex, maturity and readiness
Confirm sex and origin before selecting breeders. Tail-base and hindlimb-scale differences can help in adults, but green colour does not determine sex. An apparently correct pair may be incompatible or produce infertile eggs.
Start a record for each breeding animal with identity, origin, documented age and previous weights. Compare the weight trend with growth and body condition; delay introductions for animals still growing rapidly, losing weight or recently acquired. Use stated ages as guidance alongside these checks. If sex cannot be identified reliably, obtain assessment by qualified personnel before pairing.
Preparation and seasonal cycle
Prepare an arboreal enclosure with vegetation, several retreats and feeding points, plus inspectable laying sites. Maintain the tropical regime in the care guide without imposing a cold winter. Before changing seasons in response to infertile eggs, check sex, compatibility and condition.
Before encounters, prepare and test offspring enclosures and have first foods available. Check records for regular adult feeding and good body condition, then verify access from exposed areas to retreats. If the species protocol includes seasonal changes, adjust settings gradually and record the response. Record night-time air, surface and egg temperatures separately, noting where each is measured. Keep water available throughout preparation.
Courtship and mating
Watch territorial displays and pursuit between adults while providing escape routes and alternative housing. Infertility alone does not demonstrate a temperature problem: the pairing may need reassessment. Any partner change requires renewed health checks and supervised introductions.
Before laying and the nest
Provide sheltered sites with moist material and access for egg checks, including spaces beneath bark. Record each clutch separately and do not treat eggs as confirmation of fertility. Protect the site from disturbance by other animals and prepare juvenile housing before hatching.
Maintain a suitable laying site even without a male: females can produce unfertilised eggs. Persistent straining without laying, weakness or tissue protruding from the vent require prompt veterinary assessment. Do not wait for a predicted laying date if these signs appear. Do not squeeze the abdomen, pull eggs or give drugs to induce laying without veterinary direction.
Egg incubation
A 69–100-day hatching window is reported without a verifiable associated temperature, so it is not a complete incubation protocol. Before planning breeding, obtain a documented regime for the lineage covering temperature, medium and moisture management; do not fill the gap with values from other skinks.
Test the system before laying with an independent probe at egg height. Use clean, labelled containers, closed but allowing air exchange, with room for eggs and hatchlings. Keep eggs in their original orientation and do not detach eggs glued to their support. The substrate should retain moisture without free water on the shell; check condensation and water loss, adding water at the edge of the substrate rather than onto eggs. Record temperature and events daily without needless opening. The stated times are approximate: do not increase heat to meet a date.
First meals and juvenile care
Prepare secure arboreal housing for highly mobile hatchlings, with slender climbing supports, vegetation and easy water access. Offer appropriately sized invertebrates and verify individual intake. Check door gaps and cable passages before transferring hatchlings; separate animals that prevent others feeding.
During the first weeks, monitor each youngster: a feeding group does not guarantee that every individual eats. Record intake, droppings and weight at regular intervals to follow growth and adapt housing and food size. Provide separate accommodation if competition prevents an individual from feeding or size differences become marked. Document repeated independent meals before transfer to another keeper.
Female recovery
After reproduction provide water and the usual balanced diet, initially in manageable portions; monitor weight, activity and return of appetite. Keep supplements and lighting consistent with the feeding guide. Avoid further introductions until the previous condition has recovered; later clutches may occur without another mating. Persistent straining, weakness or protruding tissue require veterinary attention, without squeezing the abdomen.
Equipment and example diary
Place the nest where it can be checked without dismantling the enclosure. Label containers with female identity and laying date and prepare the specified medium; for attached eggs, instead provide guards in place without detaching them. If using an incubator, install a thermostat and independent probe and test it before laying. Run offspring enclosures too and prepare scales and first food, reserving capacity for later clutches.
A consistent diary using actual dates helps follow reproduction in Lamprolepis smaragdina. Start with adult identity, weight and condition, then record observed encounters, laying or birth and development conditions. After emergence record the first meal actually accepted and each youngster’s growth while continuing to follow female recovery. Over time these records help identify your lineage’s pattern without turning approximate durations into deadlines.